Inconel Plates and Sheets Supplier in India
Inconel plates and sheets are superalloy flat products composed of nickel-chromium, whose design is to be used in service in extreme heat and pressure environments, as well as corrosive environments. These materials have the ability to preserve the mechanical strength and resist oxidation up to the point where traditional stainless steels would fail and hence can be used in critical industrial applications.
Stellar Alloys is a reputed supplier of Inconel plates, sheets, coils, strips, foils and shim sheets in India, and serves the domestic and export needs. Our products boast of all the important grades such as Inconel 600, 601, 625, 718, X-750, 617, and 825, all produced to the ASTM and ASME standards. Materials are provided at full trace, mill test, and optional refurbishment to address engineering and fabrication needs.
Table of Contents
- What are Inconel Plates & Sheets?
- Available Forms of Inconel Plates and Sheets
- Manufacturing and Processing Variants
- Standard Thickness Range
- Size Range and Surface Finish
- Inconel Grades Overview (Featured Snippet Target)
- Applicable Standards
- Chemical Composition
- Mechanical Properties
- Thickness and Tolerance
- Indicative Price Table for Inconel Plates and Sheets
- Price Note and Disclaimer
- Frequently Asked Questions For Inconel Plates and Sheets
What are Inconel Plates & Sheets?
Inconel plates and sheets are flat-rolled nickel-chromium superalloy products for high-temperature and corrosion-resistant applications. They are usually offered in 600, 601, 625, and 718 grades to be processed into chemical, oil and gas and aerospace, marine, and power generation.
Available Forms of Inconel Plates and Sheets
Inconel Plates
Inconel Sheets
Inconel Shim Sheets
Inconel Coils
Inconel Strips
Inconel Foils
Manufacturing and Processing Variants
The sheets and plates of Inconel are also provided in various manufacturing conditions depending on the thickness, grade, and application requirements. Hot-rolled plates are mostly applied to heavier sections and structural parts, whereas cold-rolled sheets are favored at thinner gauges, tighter tolerances, and a better surface finish. Precision processing can be offered in strips, coils, and shims.
Standard Thickness Range
The thickness of Inconel flat products is in a large range. Sheets are usually supplied between 0.3 mm and 6 mm, whereas plates are generally supplied between 6mm and 100 mm, but this depends on the grade and standard. Shims and strips are made out of thinner gauges, and pressure vessels and heavy-duty are made out of heavier plates.
Size Range and Surface Finish
| Thickness | Width | Length. | Surface Finish |
| Sheets: 0.3 mm to 6 mm Plates: 6 mm to 100 mm | 1000 mm 1219 mm1500 mm 2000 mm 2500 mm | 2000 mm to 6000 mm Custom cut lengths available | 2B BA No.4 Hairline Hot Rolled |
Looking to Purchase Inconel Plates and Sheets
In case you intend to purchase Inconel plates or sheets in India, then the material weight will be necessary in estimating the cost correctly, logistics planning, and fabrication requirements. The weight depends on grade, thickness, width and cutting tolerance, which directly affect the price and delivery.
Use our Inconel plates and sheets weight calculator to get the accurate weight of the material according to your desired size. This solution assists consumers, engineers, and procurement departments in making decisions before ordering a quotation.
Inconel Grades Overview (Featured Snippet Target)
Inconel plate and sheet grades supplied
- Inconel 600 for oxidation and general corrosion resistance
- Inconel 601 for high-temperature oxidation resistance
- Inconel 625 for chloride and seawater corrosion resistance
- Inconel 718 for high strength and age-hardened applications
- Inconel X-750 for spring and high-temperature strength
- Inconel 617 for extreme temperature service
- Inconel 825 for acid and chemical process resistance
Applicable Standards
ASTM Standard
- ASTM B168
- ASTM B443
- ASTM B670
ASME Standards
- ASME SB168
- ASME SB443
- ASME SB670
Chemical Composition
Depending on grade, chemical composition is also controlled to comply with ASTM and ASME requirements. The complete chemical examination and certification of traceability and compliance is supported by a mill test.
| Grades | Co | Mo | Fe | Cr | Nb | Ni | Ti | Mn | Al | Cu | Si | S | – | C | B | P |
| 600 | – | – | 6.0-10.0 | 14.0-17.0 | – | 72.0 | – | 1.0 | – | 0.5 | 0.5 | 0.015 | – | 0.15 | – | – |
| 625 | 1.0 | 8.0-10.0 | 5.0 | 20.0-23.0 | 3.15-4.15 | 58.0 | 0.4 | 0.5 | 0.4 | – | 0.5 | 0.015 | – | 0.1 | – | 0.015 |
| 718 | 1.0 | 2.8-3.3 | balance | 17.0-21.0 | 4.75-5.5 | 50.0-55.0 | 0.3 | 0.35 | 0.65-1.15 | 0.2-0.8 | 0.35 | 0.015 | – | 0.08 | 0.006 | 0.015 |
| 617 | 10.0-15.0 | 8.0-10.0 | 3.0 | 20.0-24.0 | – | 44.2-56.0 | 0.6 | 0.5 | 0.8-1.5 | 0.5 | 0.5 | 0.015 | – | 0.15 | 0.006 | 0.015 |
| X-750 | 1.0 | – | 5.0-9.0 | 14.0-17.0 | 0.7-1.2 | 70.0 | 2.25-2.75 | 1.0 | 0.4-1.0 | 0.5 | 0.5 | 0.01 | – | 0.08 | – | – |
Mechanical Properties
The mechanical properties are based on grade, thickness, and heat treatment condition. Such properties as tensile strength, yield strength, elongation, and hardness are typical and adequate for service in high stress and in high temperature.
| Properties | Alloy 600 | Alloy 601 | Alloy 625 | Nickel alloy 718 |
| Yield strength – Mpa | 240min. | 300min. | 345min. | 550 min. |
| Density | 8.4 g/cm³ | 8.1g/cm³ | 8.4 g/cm³ | 8.2 g/cm³ |
| Tensile strength – Mpa | 550min. | 650min. | 760min. | 965min |
| Brinell hardness (HB) | ≤195 | ≤220 | ≤220 | ≤363 |
| Elongation % | 30min. | 30 min. | 30 min. | 30 min. |
| Melting Range,℃ | 1370-1425 ℃ | 1320-1370℃ | 1290-1350℃ | 1260-1340 ℃ |
Thickness and Tolerance
Thickness tolerance depends on product form, thickness range, manufacturing route, and applicable standard.
Typical Thickness Ranges
- Foil: 0.05 mm to 0.2 mm
- Strip: 0.2 mm to 3 mm
- Sheet: 0.3 mm to 6 mm
- Plate: 6 mm to 100 mm
Tolerance Guidance
- Sheet and strip tolerances vary by width and finish
- Plate tolerances vary by thickness band
- Tight tolerances can be supported with machining allowance
Indicative Price Table for Inconel Plates and Sheets
Inconel Grade | Product Form | Thickness Range | Indicative Price Range (INR) | Action |
Inconel 600 | Sheet | 0.5 mm to 6 mm | Price on request | Request a Quote |
Inconel 600 | Plate | 6 mm to 50 mm | Price on request | Request a Quote |
Inconel 601 | Sheet | 0.5 mm to 6 mm | Price on request | Request a Quote |
Inconel 601 | Plate | 6 mm to 50 mm | Price on request | Request a Quote |
Inconel 625 | Sheet | 0.5 mm to 6 mm | Price on request | Request a Quote |
Inconel 625 | Plate | 6 mm to 100 mm | Price on request | Request a Quote |
Inconel 718 | Sheet | 0.5 mm to 5 mm | Price on request | Request a Quote |
Inconel 718 | Plate | 6 mm to 80 mm | Price on request | Request a Quote |
Inconel X-750 | Sheet | 0.5 mm to 5 mm | Price on request | Request a Quote |
Inconel 825 | Plate | 6 mm to 60 mm | Price on request | Request a Quote |
Price Note and Disclaimer
Note: Inconel plate and sheet prices shown above are indicative only and subject to change without notice. Final pricing depends on grade selection, size, thickness tolerance, surface finish, quantity, testing requirements, and current nickel alloy market conditions.
For accurate and up-to-date pricing, please share your required grade, dimensions, quantity, and application, and our team will provide a detailed quotation.
Key Industrial Applications
- Chemical Processing : Reactors, heat exchangers, pressure vessels
- Oil and Gas : Offshore platforms, sour gas systems
- Aerospace : Engine components, exhaust systems
- Power Generation : Boilers, nuclear components, heat shields
- Marine Engineering: Seawater-exposed structural components
- Thermal Processing: Furnace linings, heat treatment baskets
Heat Treatment Processes
- Solution annealing
- Precipitation hardening
- Stress relieving
- Heat treatment depends on grade and service requirements.
Why Choose Stellar Alloys
The selection of an appropriate supplier of Inconel plates and sheets has a direct influence on the performance, safety and service life of important equipment. Stellar Alloys assists engineering companies, EPC suppliers, and purchasing experts by providing certified Inconel flat materials that satisfy the challenging operating conditions.
Our sources and supply Inconel sheets, plates, coils and shims in 600 grade, 601 grade, 625 grade, 718 grade, X-750 grade, 617 grade and 825 grade all produced to ASTM and ASME standards. Every supply is supported by complete material traceability, mill test certificates and third-party inspection on request to support chemical and mechanical compliance.
We have a technical team to help buyers select the grade and maximize the thickness and application; to help minimize the risk of fabrication and life cycle cost. Full stock of standard dimensions and the capability to do custom cutting, surface finishing, and export packaging means that we serve both urgent domestic needs as well as project shipments worldwide.
Stellar Alloys is the company that is relied upon in the chemical processing, oil and gas, power generation, aerospace, marine, and thermal engineering industries, where there is no negotiable reliability. Supply is not the only thing we are interested in, but long-term material performance and project confidence.
Related Products
- Inconel pipes and tubes
- Inconel products
- Nickel alloy plates
- Monel plates
- Hastelloy plates
Frequently Asked Questions For Inconel Plates and Sheets
An Inconel plate is a flat rolled product that is manufactured with nickel-chromium superalloys that are used to sustain the environmental conditions of extreme heat, pressure, and corrosion. The whole chemical processing, oil and gas, aerospace, power generation, and marine use of inconel plates are in areas where stainless steel cannot be reliably used.
The price of Inconel 625 plate is determined by the thickness, size, surface finish, quantity, and the prevailing rates of the nickel market. Prices are either market reflective or different according to grade and specification. To get the right price, one is advised to provide the size required, standard, and applicability.
Inconel is costly because it has high nickel content, complicated alloying components like molybdenum and niobium and its special manufacturing processes. Melting, heat treatment and complex processing are necessary to make these alloys, making them expensive to manufacture, but allowing them to work in harsh conditions.
Inconel 600 is superior to SS 304 in the high-temperature and corrosion characteristics. Although SS 304 is generally good in general environments, Inconel 600 has better oxidation resistance, high temperature strength, and chloride stress corrosion cracking resistance and thus it is suitable in challenging industrial environments.
Some applications of the Inconel plates and sheets include heat exchangers, pressure vessels, reactors, exhaust systems, furnace components, offshore structures, and aerospace components. They are suitable for critical service applications due to their capacity to maintain strength and resist corrosion at high temperatures.
The Inconel plates and sheets are generally used in Inconel 600, 601, 625, 718, X 750, 617, and 825. The grades used depend on temperature limits, corrosion resistance and the need of mechanical strength.
Yes, Inconel plates and sheets may be welded and made using the appropriate processes. Techniques of welding, like GTAW and GMAW, are mostly employed as well as corresponding filler materials. The integrity of the material is ensured by the proper heat input control and after-weld treatment.
